NO LONGER AVAILABLE
Product is no longer available.
FLOOR MOUNT – TOP ACCESS
The EU7 Series was designed with home theater systems in mind. They are ideal for installation behind a cabinet or rack system. All the outlets face upward allowing ease of access and the shallow depth allows the cabinetry to be located close to the wall.
HIGH CURRENT CAPABILITY
The EU7 Series conditioners are designed using DTCD® analysis and carry a 16-Amp continuous rating for virtually unlimited power delivery capability allowing them to power entire systems including high powered amplifiers. The non current-limiting electromagnetic breakers combined with massive 6 mm2 gauge internal wiring maximizes instantaneous current delivery which maximizes dynamic contrast and bass impact.
MEDIA SYSTEMS AND HOME THEATERS
The seven outlets provide the perfect solution for complex home entertainment and media systems. The exceptional current capacity and power rating ensures unfettered performance even when high-current amplifiers are used. The narrow profile (less than 9 mm) of the EU7 allows it to be placed behind a cabinet without pulling the cabinet out from the wall. All of the power cords plug-in from the top of the unit for easy access.
POWER SYSTEM EXPANSION
Many people already own a reference grade power conditioner like the HYDRA TRITON or DENALI but need more outlets to power accessories. They recognize that the quality of power distribution dramatically affects audio and video performance. A reference grade distributor, like the VENOM EU7, is perfect for expanding socket outlet capacity with no loss in performance.
THE PURIST APPROACH
Many audiophile purists appreciate a straightforward, high quality approach to power distribution without having to contend with the complexity, fallibility and inconvenience of power regenerators and isolation transformers. The EU7’s all metal construction, massive cryogenic conductors, quality connectors, electromagnetic breaker, Trident module and CCI™ noise filter provide by exceptional performance. The VENOM EU7 has an unbeatable combination of performance and value.
DTCD® Analysis is a technique that measures instantaneous current through low impedance electrical conductors and contacts. We use it to optimize the design, specification and construction of parts and materials to ensure maximum current delivery performance in our power distributors and power cables.
CCI™ (COMPONENT-TO-COMPONENT ISOLATION)
CCI™ v3 modules isolate power line noise from one component to another component. These new CCI™ modules were originally developed in our military, scientific and medical imaging research programs. They are currently being used to great effect in Electrophysiology heart surgery. As used in the EU7, noise may be reduced more than -24dB from 100 KHz to 10 MHz!
ZPP-DS BUSS SYSTEM
ZPP-DS (Zero-Point Power Distribution System) is Shunyata Research’s exclusive power buss made entirely of solid OFE Alloy 101 copper. The ZPP-DS unifies the internal wiring, outlet contacts and power distribution buss into a single zero-point of electrical contact. This improves contact integrity and DTCD® performance by eliminating many of the terminal connections and the daisy-chained wiring found in other products.
SUPERIOR A.C. OUTLET
From the outside, all A.C. outlets look similar other than the color, but once you look inside there are dramatic differences that are easy to define. A common outlet that is typical of what is used in new home construction and some high-end power conditioners has a small body decreasing air flow and the ground strap is made from inferior tin and nickel instead a copper alloy. The internal current carrying contacts of the EU7 are much larger than in common outlets and are made from a high quality brass and copper alloys. The common outlet makes contact on a thin knifes edge. This can arc and develop carbon deposits over time, decreasing electrical integrity. The EU7 outlet has a triple-wipe contact system that has broad contact areas that grab the plug from three different sides.
HIGH CURRENT A.C. INLET
Connector inlets are very important to performance and specifically DTCD®. Most power conditioners use the the ubiquitous and inferior IEC C15 inlet.
The VENOM EU7 comes equipped with the IEC C19 which has larger electrical contacts and was designed specifically for high capacity industrial use and to carries a 16-Amp continuous service rating.
The TRIDENT Module provides a massive 40,000 amps of transient protection and noise reduction in a single compact module. The noise reduction circuitry is similar in design to the MPDA™ and CCI™ noise reduction filters. It also includes a fault detection circuitry and and LED status indicator that monitors its operation. The module was designed to be field replaceable with only two terminal connections.
The VENOM EU7 is wired with proprietary ArNi® conductors developed by Shunyata Research. These conductors are “hollow tube” VTX™ designs that are made from pure OFE C10100 copper and then treated with the KPIP™ Processor. Shunyata Research uses only the highest purity of copper available for the production of its wire products. OFE Alloy 101 or C10100 is the highest grade of copper with a minimum 99.99% purity and a conductivity rating of 101% IACS.
Mechanical vibration can be very destructive to system performance. The EU7 was designed from its inception to include advanced forms of vibration control that improve the recovery of subtle musical detail and nuance. All chassis panels and internal structure are treated with vibration dampening panels. Each outlet is isolated from the chassis with a vibration dampening gasket that reduces vibration conducted through the AC cables. All internal modules, filters and electronics are encapsulated in a vibration absorbent compound.
KPIP™ “BLACKBIRD” PROCESSOR
Each EU7 is treated with Shunyata Research’s proprietary KPIP™ Processor. The ‘Kinetic Phase Inversion Process’ dramatically reduces burn-in time and significantly improves sonic performance.
Many of the electrical parts in the EU7 are treated in Shunyata Research’s own advanced computer controlled cryogenics lab.
Over Current Protection: Hydraulic electromagnetic breaker
Sockets / Connectors:
Over more than 2 decades, the reliability and durability of Shunyata Research products has become a legendary attribute of the brand. Shunyata products are completely non-reactive and run cool to the touch. They do not hum, vibrate, buzz, or generate heat and do not require any ventilation. Despite heavy-use applications in studios, medical labs, and home environments, Shunyata Research products maintain an almost zero failure rate.
In an era of products that are mass-produced, Shunyata Research invests in training career craftsman who build our products by hand at our factory in Poulsbo, Washington. The exceptional fit, finish, and attention to detail has become a hallmark trait of Shunyata Research products going back to its inception in 1998. Shunyata Research has been building some of the finest power and cable products in the industry for more than twenty years. The commitment to building durable products that are designed to last a lifetime elevates our products to the top of their class.
Safety and quality control is job one at Shunyata Research. Before anything leaves the factory, we test each and every product thoroughly and carefully for safety and quality. This explains the long-term success of Shunyata Research products in the professional recording, medical, scientific, and consumer industries. Shunyata Research’s impeccable product safety and reliability track record for the past 23 years speaks for itself.
NO HUM — NO BUZZ — NO HEAT
LIMITED LIFETIME WARRANTY