Product is no longer available.
The Omega S/PDIF and Clock cables elevate the performance of digital systems to a degree that competes with the world’s finest analog and master tape sources. Shunyata Research’s innovative and proprietary technologies reduce common-mode noise and cable-induced jitter with its associated time smear that ultimately limits the performance of digital playback. The Omega S/PDIF and Clock cables don’t just improve digital playback, they literally redefine digital audio as a reference medium.
AWARDS & REVIEWS
“These cables were 100% doing something, and they did create a bit of a larger stage as well. The Lina DAC went from smooth and a touch warm to complete audiophile territory with the clock and Omega cables. There was still warmth but it was more of a warmth with added clarity.”
– Steve Huff, September 16, 2022
Notes on Omega Clock 75 cables in dCS Lina Master Clock Review
Read Full Review Here
TECHNOLOGY
Shunyata Research digital cables are produced using a Precision Matched Z (PMZ) concept. This means that tolerances of the conductor surface, dielectric extrusion, and the precision of the braided shield are held to minute variances. To achieve these tight tolerances, the extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. The result is better performance through a reduction of cable-induced ‘signal jitter’. (Note: Z means impedance)
ArNi® is a type of wire created by Shunyata Research designed to be the finest quality wire available for audio purposes. It begins with the highest purity of copper available – OFE C10100 or Ohno (single crystal). Then it is formed in virtual hollow tubes eliminating skin effects and eddy current distortions. A premium fluorocarbon insulation minimizes dielectric absorption and re-radiation, greatly improving resolution and clarity. In addition, the wire undergoes our proprietary KPIP™ process.
For the purest signal possible, Shunyata Research has combined its patent-pending TAP technology (trans-axial polarizer) and CMode filter (common mode filtering technology) into a single hybrid module. The TAP polarizer reduces polarization distortion while the CMode filter simultaneously reduces high-frequency noise distortion, delivering analog ease and palpable background silence that will close the gap between digital and analog front-end performance.
PMZ Connectors
Pulse timing is critical to digital transmission accuracy. It is critical that a digital connector’s impedance precisely match the cables's characteristic impedance. A mismatched connector will create signal reflections which increases digital jitter or phase noise. A 50-ohm cable requires a 50-ohm termination — not the commonly used 75-ohm connector. Shunyata Research is careful to ensure that every cable and connector are precisely matched for a seamless component to component connection.
KPIP™ PROCESSING
Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP™ processing to dramatically reduce burn-in time and significantly improve sonic performance, delivering a relaxed and life-like presentation.
SPECIFICATIONS
|
Cable Type: PMZ Coaxial Conductors: ArNi ® / Silver Dielectric: Fluorocarbon PTFE Connectors: BNC-75 Characteristic Impedance: 75 ohms |
TAP/CMode Hybrid Modules: two KPIP Processing: 4-days Length: 1.25 meters Safety Assurance: |
DOWNLOAD
OMEGA Digital Cables Brochure
OUR ASSURANCES
RELIABILITY
Over more than 2 decades, the reliability and durability of Shunyata Research products has become a legendary attribute of the brand. Shunyata products are completely non-reactive and run cool to the touch. They do not hum, vibrate, buzz, or generate heat and do not require any ventilation. Despite heavy-use applications in studios, medical labs, and home environments, Shunyata Research products maintain an almost zero failure rate.
QUALITY
In an era of products that are mass-produced, Shunyata Research invests in training career craftsman who build our products by hand at our factory in Poulsbo, Washington. The exceptional fit, finish, and attention to detail has become a hallmark trait of Shunyata Research products going back to its inception in 1998. Shunyata Research has been building some of the finest power and cable products in the industry for more than twenty years. The commitment to building durable products that are designed to last a lifetime elevates our products to the top of their class.
SAFETY
Safety and quality control is job one at Shunyata Research. Before anything leaves the factory, we test each and every product thoroughly and carefully for safety and quality. This explains the long-term success of Shunyata Research products in the professional recording, medical, scientific, and consumer industries. Shunyata Research’s impeccable product safety and reliability track record for the past 23 years speaks for itself.
NO HUM — NO BUZZ — NO HEAT
LIMITED LIFETIME WARRANTY
