The Shunyata Research DF-SS (Dark Field Suspension System) takes Caelin Gabriel’s original, patented, Dark Field Elevator technology to an entirely new performance level by adding two important design innovations. In addition to the static-field neutralization material used in the original DFE, the DF-SS incorporates two forms of vibration isolation that reduces vibration transfer from the floor to the cable.
3 units per box.
When applied as a system, the DF-SS renders a significant reduction in perceived noise and time smear, yielding improved focus, clarity, depth and spatial information.
– Static-Neutralizing Polymer
– Vibration Absorbing Compound (internally)
– Polymer Cable Suspension Bridge
– Vibration Absorbing Feet for hard surfaces
– Wide Foundation (won’t tip or fall)
– Unequaled Shunyata Build Quality
Can be used to support interconnects, speaker cables and power cables.
The DF-SS incorporates an energy absorbing suspension bridge that supports a wide variety of cables. The polymer band has the unique ability to dissipate vibrational energy, preventing it from being coupled between the floor and the cable.
The second innovation comes from the granular compound that fills the base of the DF-SS. This compound dissipates vibrational energy that would otherwise couple to the cable, that may cause a subtle form of signal distortion. These combined technologies make the DF-SS the most technically advanced cable suspension system on the market.
The DF-SS’s effectiveness has been demonstrated with accelerometer tests that clearly show its ability to reduce floor borne vibration which is common to all listening environments.
Dimensions: 4″ length x 2.5″ width x 3.5″ height
Over more than 2 decades, the reliability and durability of Shunyata Research products has become a legendary attribute of the brand. Shunyata products are completely non-reactive and run cool to the touch. They do not hum, vibrate, buzz, or generate heat and do not require any ventilation. Despite heavy-use applications in studios, medical labs, and home environments, Shunyata Research products maintain an almost zero failure rate.
In an era of products that are mass-produced, Shunyata Research invests in training career craftsman who build our products by hand at our factory in Poulsbo, Washington. The exceptional fit, finish, and attention to detail has become a hallmark trait of Shunyata Research products going back to its inception in 1998. Shunyata Research has been building some of the finest power and cable products in the industry for more than twenty years. The commitment to building durable products that are designed to last a lifetime elevates our products to the top of their class.
Safety and quality control is job one at Shunyata Research. Before anything leaves the factory, we test each and every product thoroughly and carefully for safety and quality. This explains the long-term success of Shunyata Research products in the professional recording, medical, scientific, and consumer industries. Shunyata Research’s impeccable product safety and reliability track record for the past 23 years speaks for itself.
NO HUM — NO BUZZ — NO HEAT
LIMITED LIFETIME WARRANTY