NO LONGER AVAILABLE
Product is no longer available.
No Hum No Buzz No Heat
“I’ve been using the DENALI 6000 in a small set up — Wilson Sasha with Dan D’Agostino integrated. All I can say is I want every one of my customers to have one. STUNNING!!!”
– Maier Shadi, The Audio Salon, Santa Monica.
The DENALI 6000/S provides all of the performance, technology and value of the DENALI 6000/T — but within a chassis made for standard shelf applications. Make no mistake, the DENALI 6000/S has proven itself to be state-of-the-art in terms of its unique design, parts customization and exceptional performance. However, its most dramatic asset is a price-point that literally has no competition. Products that cost two to three times that of the DENALI 6000/S just don’t measure up in terms of performance, build quality and most importantly in measurable noise-reduction. Internally, the 6000/S features custom-manufactured solid-copper outlets, patented QR/BB modules for high-current applications and exclusive CCI™ filters that reduce noise to an astounding – 60dB at 1 MHz. In an era where five-figure price-tags have become commonplace for power-conditioners, the DENALI 6000/S delivers state-of-the-art performance, patented technologies and exceptional value. All that combined with a Limited Lifetime Warranty is a testament to the DENALI’s superiority.
HIGH CURRENT CAPABILITY
The DENALI Series conditioners are designed using DTCD® analysis and carry a 20-Amp continuous rating for virtually unlimited power delivery capability allowing them to power entire systems including high powered amplifiers. The non current-limiting electromagnetic breakers combined with massive 8 gauge internal wiring maximizes instantaneous current delivery which maximizes dynamic contrast and bass impact.
Shunyata Research manufacturers its own audiophile-grade AC outlets. The internal contacts are made from pure OFE copper providing the highest level of conductivity with the least amount of electrical resistance. There is no better outlet in the industry.
The DENALI is wired with Shunyata Research’s ArNi® conductors. These conductors are “hollow tube” VTX™ designs that are made from pure OFE C10100 copper and then treated with the KPIP™ Processor.
KPIP™ “BLACKBIRD” PROCESSOR
Each DENALI is treated with Shunyata Research’s proprietary KPIP™ Processor. The ‘Kinetic Phase Inversion Process’ dramatically reduces burn-in time and significantly improves sonic performance.
Many of the electrical parts in the DENALI are treated in Shunyata Research’s own advanced computer controlled cryogenics lab.
Mechanical vibration can be very destructive to system performance. The DENALI was designed from its inception to include advanced forms of vibration control that improve the recovery of subtle musical detail and nuance. All chassis panels and internal structure are treated with vibration dampening panels. Each outlet is isolated from the chassis with a vibration dampening gasket that reduces vibration conducted through the AC cables. All internal modules, filters and electronics are encapsulated in a vibration absorbent compound.
The NIC™ is a proprietary technology using ferroelectric substances that reduces high frequency power line noise. The DENALI’s next-generation NIC™ v2s have improved performance efficiency and yet are smaller in size.
Patent No. US 8,658,892
CCI™ v3 modules isolate power line noise from one component to another component. These new CCI™ modules were originally developed in our military, scientific and medical imaging research programs. They are currently being used to great effect in Electrophysiology heart surgery. CCI™ interference levels can be reduced more than -60dB from 500 KHz to 10 MHz!
New QR/BB™ technology dramatically eliminates any sense of dynamic compression that is often heard when an amplifier is connected to a power conditioner. Dynamics are actually improved when an amplifier is connected to the DENALI even when compared to a direct connection to the wall outlet.
~ Patented ~
Input / Output Voltage:
Over Current Protection: Hydraulic electromagnetic breaker
Sockets / Connectors:
Inlet to Z1 or Z2
Inlet to Z3 (HC)
Over more than 2 decades, the reliability and durability of Shunyata Research products has become a legendary attribute of the brand. Shunyata products are completely non-reactive and run cool to the touch. They do not hum, vibrate, buzz, or generate heat and do not require any ventilation. Despite heavy-use applications in studios, medical labs, and home environments, Shunyata Research products maintain an almost zero failure rate.
In an era of products that are mass-produced, Shunyata Research invests in training career craftsman who build our products by hand at our factory in Poulsbo, Washington. The exceptional fit, finish, and attention to detail has become a hallmark trait of Shunyata Research products going back to its inception in 1998. Shunyata Research has been building some of the finest power and cable products in the industry for more than twenty years. The commitment to building durable products that are designed to last a lifetime elevates our products to the top of their class.
Safety and quality control is job one at Shunyata Research. Before anything leaves the factory, we test each and every product thoroughly and carefully for safety and quality. This explains the long-term success of Shunyata Research products in the professional recording, medical, scientific, and consumer industries. Shunyata Research’s impeccable product safety and reliability track record for the past 23 years speaks for itself.
NO HUM — NO BUZZ — NO HEAT
LIMITED LIFETIME WARRANTY