$7,000.00

Where indicated, price is for the US only.
For non-US customers, please contact regional distributor for pricing.

Product Code: PD-DEN-D6TV2/S-US/120 Categories: , Tags: ,

PEAK PERFORMANCE

 

The Denali 6000/Tower v2 Limited Edition borrows its form from the iconic, original Denali 6000/T but adds the advances in science that made the Denali 6000/Sv2 shelf version the finest product in its category.
 
The Denali 6000/T v2 is packed with updated v3 filtering, larger versions of Shunyata’s patented QR/BB technology and NIC (Noise Isolation Chambers). CGS Ground noise filtering minimizes ground noise.  As always, the integral three-stage Trident Defense System provides optimum protection from spikes and surges. Even the Denali 6000/T v2’s heavy, integrated stand provides massive isolation from floor borne vibration. Patented technologies from within the Denali 6000/Tower are now applied within critical medical and studio, mastering and film applications world-wide
 
With its litany of updates, the Denali 6000/Tower v2 stands as the most meticulously crafted, scientifically vetted product of its kind. 
 
The Denali 6000/Tv2 is available for a limited time only!

 


AWARDS & REVIEWS

hi-fi 2020 Editors Choice award

“I’ve been using the DENALI 6000 in a small set up — Wilson Sasha with Dan D’Agostino integrated. All I can say is I want every one of my customers to have one. STUNNING!!!”

—Maier Shadi, The Audio Salon, Santa Monica

_____

“The Denali is one of the rare exceptions: you put it in the system, and the system immediately sounds better… job done, open wallet and extract money.”

— Alan Sircom, The Audio Salon, Hi-Fi+ issue 162
Read the full review (PDF) here.

 


TECHNOLOGY

qrbb-technology

QR/BB™ TECHNOLOGY

The QR/BB™ module possesses the ability to act as an electric charge reservoir, meaning it stores and releases energy in a manner that improves a component’s access to instantaneous current.

Dynamics are actually improved reducing any sense of dynamic strain often heard from amplifiers that are connected with lesser power cables.

The sonic result is a lifelike presentation of timing and dynamic contrasts in sound that cannot be replicated by ANY other means.  In layman’s terms, it acts like a super-charger for amplifiers, pre-amps, DACs and CD players.

— Patent Number: US 10,031,536 —

cci-noise-reduction

CCI™ NOISE REDUCTION

Traditional power conditioners are designed to block incoming noise from outside the home, but do not address the noise that is generated by the electronic components themselves. In fact, most conditioners reflect noise back into other components connected to the power conditioner. CCI™ (Component-to-Component Isolation) is one of the most significant but often overlooked aspects to power system performance. The CCI™ filter consists of a proprietary multi-stage filter that reduces electrical noise and interference generated by a component’s power supply.

DTCD logo

DYNAMIC TRANSIENT CURRENT DELIVERY

DTCD™ Analysis is a technique that measures instantaneous current through low impedance electrical conductors and contacts.  Shunyata Research uses it to optimize the design, specification and construction of parts and materials to ensure maximum current delivery performance.  Each part, conductor, noise circuit and material allows for maximum throughput of instantaneous current.

Listeners will experience earth-shaking low-frequency performance from even the highest-current amplifiers as well as dynamic contrasts unheard of outside of a live event.  More than any other design parameter, Shunyata Research’s skill in eliminating resistance and maximizing peak-current delivery is unmatched.

Everest coffin body from the top

MONOLITHIC CONSTRUCTION

One of our fundamental design imperatives is to ensure life-long performance and durability. Long-term exposure to air can oxidize and corrode wiring and sensitive electronic components. All of the filters, PCBs, connections and internal wiring are contained within a monolithic enclosure and then potted with ceramic materials that hermetically seal the contents. This protects the circuits and wiring from humidity and oxidation, and eliminates internal vibration between components. This unique construction methodology delivers exceptional and consistent performance that will not degrade over time.

Denali 6000T UK.322

CGS - Chassis Grounding System

Significant amounts of noise exist on the ground plane of power lines. The ground wires can act as antennae, picking up electrical noise that can degrade the performance or operation of the electronic components. The CGS — Chassis Ground System is a proprietary feature developed by Shunyata Research to significantly reduce ground-plane noise; improving low-level resolution and clarity.

Click here to read the CGS Application Guide (PDF)

Many Shunyata Research power conditioners have one to four terminals that allow all system component chassis to be interconnected to a common earth ground. We offer several models of CGC chassis grounding cables each made to your custom length and termination requirements.

OFE-ingot

ArNi® Conductors

Shunyata Research’s  ArNi® conductors are designed to be the finest quality wire available for power and audio purposes. They start life using the highest purity copper available – OFE C10100 (or Ohno single crystal). Then they are formed into “virtual hollow tubes” that we call VTX™.  The core of the conductor is completely hollow forcing the current to only travel through the periphery of the conductor, therby eliminating skin effects and random eddy currents.

And finally, every ArNi® wire undergoes our proprietary KPIP™ process.

EM Breaker

Electromagnetic Breaker

Over-current protection is a requirement for today’s high current audio power distributors. The vast majority of manufacturers use an inexpensive thermal fuse or breaker. Both are specifically designed to heat up as the current level rises. This causes voltage drops, increased contact impedance, thermal noise, excessive heat generation and current limiting effects. There is a better solution — the hydraulic electromagnetic breaker that utilizes low-impedance relays and a sensing coil that reads the current level without heating up or limiting current. They can operate right up the to the maximum current level without heating up or limiting instantaneous current. They are rarely used in competitive products since they cost 10-20 times that of a common fuse or thermal breaker.

Vibration Isolation

After years of research into the negative effects of vibration, Shunyata Research developed its own ‌vibration isolation using sub-miniature accelerometers that accurately measures the effects of floor and airborne sound waves. We use it in the development of vibration absorbing materials such as energy absorbing footers, AC outlet gaskets and chassis dampeners that reduce resonant vibration. Recognizing that vibration control is important to overall performance, our chassis are made with optimally dampened steel and aluminum, rather than plastic or thin-wall sheet metals.

KPIP Blackbird Processor

KPIP™ PROCESSING

Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP™ processing to dramatically reduce burn-in time and significantly improve sonic performance, delivering a relaxed and life-like presentation.

sonic weld sm-close

Sonic Welding

Simple crimping, soldering, brazing and screws are all inferior methods of joining two wires or terminals together. Sonic welding uses high-energy sonic waves to literally join two metals together at a molecular level and cold-welding uses high-energy pneumatic pressure to bond metals. Shunyata Research uses both methods to secure connections that do not degrade over time.

Cryo

Cryogenic Processing

Shunyata Research operates its own onsite Cryogenics International computer-controlled cryogenic plant. Liquid nitrogen is used to reduce the temperature of the contents to -320 degrees Fahrenheit. The computer monitors and lowers the temperature by a single degree at a time to prevent thermal shock.

We use this process to improve the performance of connectors and various electrical components that are used in our power products and signal cabling.

 

SPECIFICATIONS

 

Maximum Voltage:
125 VAC r.m.s. unregulated
240 VAC  r.m.s. unregulated

Input Current Ratings:
Maximum Continuous Current: 20A @ 125 VAC
Maximum Continuous Current: 16A @ 240 VAC

Output Current Ratings:
Maximum Current per Socket: 20A @ 125 VAC
Maximum Current per Socket: 16A @ 240 VAC

Transient Suppression:
40,000 Amps @ 8/50 μs

Over-Current Protection:
Hydraulic Electromagnetic Breaker

Wiring System:
Buss system: 8 gauge ArNi® VTX™
Circuit wiring: 10 gauge ArNi® VTX™
Voltage Rating: 600 V 105° C

Noise Suppression:
IEC Input to Output:
> 50 dB NR (Bandwidth: 100 kHz – 30 MHz)
Socket to Socket:
> 60 dB NR (Bandwidth: 100 kHz – 30 MHz)

Connectors & Sockets:
Inlet: IEC C20
Outlet Sockets: NEMA 5-20R

Isolation Zones: 6 individual zones

QR-BBTM / NICTM System: 6,775 mm2

Vibration Control:
Vibration dampening panels (internal)
AC outlet dampening gaskets
Shunyata Isolation SSF-50 Footer

Construction:
Aluminum and steel chassis
Anodized, aluminum faceplate

GPNR:
Length: 127 mm
Diameter: 38 mm

Dimensions:
Width: 7.75 inches (19.7 cm)
Depth: 17.25 inches (43.8 cm)
Height: 17.75 inches (45.0 cm)

Weight:
24.1 lbs (11.0 kg)

OUR ASSURANCES

RELIABILITY

Over more than 2 decades, the reliability and durability of Shunyata Research products has become a legendary attribute of the brand.  Shunyata products are completely non-reactive and run cool to the touch.  They do not hum, vibrate, buzz, or generate heat and do not require any ventilation. Despite heavy-use applications in studios, medical labs, and home environments, Shunyata Research products maintain an almost zero failure rate.

QUALITY

In an era of products that are mass-produced, Shunyata Research invests in training career craftsman who build our products by hand at our factory in Poulsbo, Washington. The exceptional fit, finish, and attention to detail has become a hallmark trait of Shunyata Research products going back to its inception in 1998. Shunyata Research has been building some of the finest power and cable products in the industry for more than twenty years. The commitment to building durable products that are designed to last a lifetime elevates our products to the top of their class.

SAFETY

Safety and quality control is job one at Shunyata Research. Before anything leaves the factory, we test each and every product thoroughly and carefully for safety and quality. This explains the long-term success of Shunyata Research products in the professional recording, medical, scientific, and consumer industries. Shunyata Research’s impeccable product safety and reliability track record for the past 23 years speaks for itself.

NO HUM — NO BUZZ — NO HEAT

LIMITED LIFETIME WARRANTY

Lifetime warranty badge

 
The unparalleled craftsmanship and build quality of Shunyata Research products is backed by a limited lifetime warranty. This demonstrates our commitment to building the finest products on the planet and providing exceptional customer support.
 
VALID ONLY IN THE US AND CANADA
Scroll to Top