The DENALI 6000/S provides all of the performance, technology and value of the DENALI 6000/T — but within a chassis made for standard shelf applications. Make no mistake, the DENALI 6000/S has proven itself to be state-of-the-art in terms of its unique design, parts customization and exceptional performance. However, its most dramatic asset is a price-point that literally has no competition. Products that cost two to three times that of the DENALI 6000/S just don’t measure up in terms of performance, build quality and most importantly in measurable noise-reduction. Internally, the 6000/S features custom-manufactured solid-copper outlets, patented QR/BB modules for high-current applications and exclusive CCI™ filters that reduce noise to an astounding – 60dB at 1 MHz. In an era where five-figure price-tags have become commonplace for power-conditioners, the DENALI 6000/S delivers state-of-the-art performance, patented technologies and exceptional value. All that combined with a Limited Lifetime Warranty is a testament to the DENALI’s superiority.
HIGH CURRENT CAPABILITY
The DENALI Series conditioners are designed using DTCD® analysis and carry a 20-Amp continuous rating for virtually unlimited power delivery capability allowing them to power entire systems including high powered amplifiers. The non current-limiting electromagnetic breakers combined with massive 8 gauge internal wiring maximizes instantaneous current delivery which maximizes dynamic contrast and bass impact.
Shunyata Research manufacturers its own audiophile-grade AC outlets. The internal contacts are made from pure OFE copper providing the highest level of conductivity with the least amount of electrical resistance. There is no better outlet in the industry.
The DENALI is wired with Shunyata Research’s ArNi® conductors. These conductors are “hollow tube” VTX™ designs that are made from pure OFE C10100 copper and then treated with the KPIP™ Processor.
KPIP™ “BLACKBIRD” PROCESSOR
Each DENALI is treated with Shunyata Research’s proprietary KPIP™ Processor. The ‘Kinetic Phase Inversion Process’ dramatically reduces burn-in time and significantly improves sonic performance.
Many of the electrical parts in the DENALI are treated in Shunyata Research’s own advanced computer controlled cryogenics lab.
Mechanical vibration can be very destructive to system performance. The DENALI was designed from its inception to include advanced forms of vibration control that improve the recovery of subtle musical detail and nuance. All chassis panels and internal structure are treated with vibration dampening panels. Each outlet is isolated from the chassis with a vibration dampening gasket that reduces vibration conducted through the AC cables. All internal modules, filters and electronics are encapsulated in a vibration absorbent compound.
The NIC™ is a proprietary technology using ferroelectric substances that reduces high frequency power line noise. The DENALI’s next-generation NIC™ v2s have improved performance efficiency and yet are smaller in size.
Patent No. US 8,658,892
CCI™ v3 modules isolate power line noise from one component to another component. These new CCI™ modules were originally developed in our military, scientific and medical imaging research programs. They are currently being used to great effect in Electrophysiology heart surgery. CCI™ interference levels can be reduced more than -60dB from 500 KHz to 10 MHz!
New QR/BB™ technology dramatically eliminates any sense of dynamic compression that is often heard when an amplifier is connected to a power conditioner. Dynamics are actually improved when an amplifier is connected to the DENALI even when compared to a direct connection to the wall outlet.
~ Patented ~
DENALI Series Power Conditioner Introduction
A video introduction of the DENALI Series Power Conditioner.
DENALI Series – Design and Technology
Design principles and new technologies for the DENALI Series Power Conditioner.
DENALI Series – Noise Reduction Demonstration
This video demonstrates the profound noise reduction capabilities of the DENALI Series power conditioners.
DENALI – Controlling Vibration
This is a demonstration of the vibration technologies used in the Denali Series power conditioners.
– US Max Input: 125 V~
– Output: 90-125 V~ unregulated
– EU Max Input: 240 V~
– Output: 90-240 V~ unregulated
– US: Max current: 20 Amps (continuous)
– EU: Max current: 16 Amps (continuous)
– Peak instantaneous current: >100 Amps @ 8.33ms
OVER CURRENT PROTECTION
– Hydraulic electromagnetic breaker
– NextGEN TMOV Transient Protection
– 40,000 Amps @ 8/50μs
SOCKETS / CONNECTORS
– INLET: IEC C20
– US: 6 NEMA 5-20R (3-pin, 20A)
– EU: 6 Euro CEE 7/3
– 1 Ground lug
> 60db (500 kHz – 10 MHz)
> 24db (100 kHz – 30 MHz)
Inlet to Z1 or Z2
> 25db (500 kHz – 30 MHz)
Inlet to Z3 (HC)
> 15db (100 kHz – 30 MHz)
– NIC™ v2 (Patented)
– QR/BB™ Technology (Patented)
– Trident Module
– 3 CCI™ v3 Noise Filters
– 8 & 12 gauge VTX™ conductors
– OFE C10100 Copper (Certified ASTM F68)
– KPIP™ Processed
– All aluminum chassis
– Brushed aluminum, anodized faceplate
– Vibration dampening (chassis)
– AC outlet dampening gaskets
– Shunyata’s Isolation Footer
Width: 17.25 inches (43.8 cm)
Depth: 12.15 inches (30.9 cm)
Height: 4.50 inches (11.4 cm)
Weight: 12.3 lbs (5.6 kg)